Dicom Storage Commitment; Setting The Network Speed - Siemens ACUSON Cypress Operator's Manual

Transferring Studies
9-10

DICOM Storage Commitment

Storage Commitment is enabled by selecting any setting but "None" from the
Storage Commitment drop-down menu. When enabled, the Cypress system
will query the Storage Commitment server after a study transfer is complete to
verify that all images in the study have been properly received and stored.
NOTE If Storage Commitment is enabled, but the selected Storage
Commitment server does not support this feature, the Cypress will
automatically cancel the Storage Commitment operation.
When Storage Commitment is Enabled, the Action column on the Shutdown
page changes from
DICOM
the percentage in the Status column increases. When all the images have been
verified, the Storage Commitment entry is removed from the screen.
NOTE It may take several minutes for the Storage Commitment Server to
respond to a Storage Commitment request. During that time, any
other transfers that have been queued will continue. If the Storage
Commitment Server has not validated all images in the study, the
Storage Commitment entry for that study will remain on the transfer
status display. If this happens, you can cancel the Storage
Commitment function by highlighting the study, then clicking
[ ].
CANCEL

Setting the Network Speed

To set the network speed and duplex options, follow these steps:
Press .
SETUP
1.
Click the Shutdown tab, then click [
2.
Highlight Network Adapter.
3.
Click [
RUN SELECTED
4.
Set the Speed and Duplex options using the radio buttons.
5.
Click [ ].
OK
6.
NOTE To return to imaging, click [
changes, click [
ACUSON Cypress™ Operator's Manual
to Storage Commitment. As each image is verified,
UTILITIES
].
]; to restart and activate the
CLOSE
].
SHUTDOWN
].