Soft Windows 5-23 - Siemens ACUSON Cypress Operator's Manual

Soft Windows
2D
Table 16 describes how Soft Windows and their corresponding knobs on the
keyboard operate in
2D
which options are installed on your Cypress system.
Scanning Soft Windows Options
2D
TABLE 16.
Window/Function
Steer
2D
(Linear)
Changes the scanning
angle of the image
2D
Protocol
(when in a stress pro-
tocol)
Depth
Adjusts the scanning
field of view
Zoom
(Available only in active
scanning)
Allows you to select
and enlarge a portion
of the image.
ACUSON Cypress™ Operator's Manual
scanning. The functions available to you depend on
Description
There are three positions: 0°, +20°, –20°. Press the
corresponding Soft Window knob to select
.
2D STEER
To steer the beam to the right, turn the knob
clockwise.
To steer the beam to the left, turn the knob coun-
terclockwise.
Displays the Stage and View labels. Continue turn-
ing the knob until either Rest (for 2-Stage and 3-
Stage) or Base (for Pharmacological) is highlighted.
Scanning depth is measured in centimeters and
varies according to the transducer frequency. Press
the corresponding Soft Window knob to select
.
DEPTH
For a shallower depth, turn the knob counter-
clockwise.
For a deeper depth, turn the knob clockwise.
The current selection is displayed on the top left
corner of the screen (see "Cypress System Data"
on page 5-9).
Press the corresponding Soft Window knob to
select . This places the "zoom" box on the
ZOOM
image. Use the Trackball to position the Zoom box
To change the magnification factor, turn the knob
clockwise.
Press < > to enlarge the image.
ENTER
To reposition or resize the zoom box, turn the
knob counterclockwise.
Press the Soft Window knob to exit.
ZOOM
2D Scanning
5-23