Troubleshooting A Network Dicom Transfer - Siemens ACUSON Cypress Operator's Manual

Troubleshooting a Network
When transferring studies to a DICOM server, an error may be detected. Table
44 describes the possible errors and solutions.
Network Errors
TABLE 44.
Error
Could not establish a connec-
tion to the server - Verify
failed, Save canceled
Could not establish an associa-
tion with the server - Save
canceled
DICOM Error: C-STORE response =
xxxx, do you wish to continue?
A network timeout error has
occurred - Save canceled
An internal DICOM error has
occurred - Save canceled
ACUSON Cypress™ Operator's Manual
Transfer
DICOM
Solution
The Cypress system did not receive
a response to its Verification (C-
Echo) command. Check the
server settings on the
page and verify that the server is
on-line and retry.
The server rejected the Cypress
system connection, most likely due
to an image format incompatibility.
Check
DICOM
ring to the Cypress system and
server's
DICOM
ance Statements.
The server sent back an error code
on the save. Consult your server's
error code information for more
details. If you want to continue the
save, click [
YES
click [ ]. The error will appear only
NO
if the Ignore Server Response
checkbox is not checked (see Table
41 on page 9-6).
The Cypress system received a
time-out error. Verify that the server
is on-line.
Verify that the server is on-line. Test
the connection by using the
[ ] button on the
VERIFY
Server Information section located
in the Setup menu.
Transferring Studies
DICOM
Setup
DICOM
compatibility by refer-
Conform-
DICOM
]. To abort the save,
DICOM
9-21