Turning The Imt Grid On And Off; Using The Imt On-Screen Labels - Siemens ACUSON Cypress Operator's Manual

Select the desired measurement (for example, Near wall 180) and press
8.
.
<ENTER>
Position the cursor using the Trackball and press
9.
(see "About Construction Methods" on page 7-4 for details on different trace
methods).
Complete the first border trace and double click
10.
sor is displayed.
Position the cursor using the Trackball and press
11.
Double click
<ENTER>
12.
To accept the measurement click [
13.
click [ ], or to re-start the measurement click [
CANCEL
NOTE See "About Default Sites for Vascular" on page 7-5 for information on
how to customize the sites under IMT.

Turning the IMT Grid ON and OFF

The IMT grid is used as an anatomical marker and overlays the image. During
an IMT exam the grid can be turned
low these steps:
Press .
TOOLS
1.
Click [GRID].
2.
Repeat steps 1 and 2 to toggle the grid

Using the IMT On-screen Labels

On-screen labels are used to identify the view (for example, R CCA NW). In 2D
scanning when the IMT options are installed and the IMT protocol is active, the
Protocol Soft Window knob is used to display labels for the Site and Angle
(Angle corresponds to an arc angle device).
To add labels during an IMT exam, follow these steps:
Turn the Protocol Soft Window knob to scroll through the screen labels for
1.
IMT until the desired label is displayed.
ACUSON Cypress™ Operator's Manual
to end the trace.
], to erase the measurement and exit
OK
or . To change the grid setting, fol-
ON OFF
or
ON OFF
IMT Options Package
to start the trace
<ENTER>
. The second cur-
<ENTER>
.
<ENTER>
].
CLEAR
.
7-19