Siemens ACUSON Cypress Operator's Manual page 284

Connecting External Devices
A-4
Connect the 15-pin end of the cable to the video port on the Cypress system
3.
(see Figure 49).
Connect the RCA-to-BNC adapter end of the cable to the Video In connector
4.
on the printer (see Figure 49).
Connect the power cord on the printer and plug it in.
5.
Turn on the Cypress system, and then the printer.
6.
On the Cypress system, press the
7.
tab.
Use the Video Out Mode drop-down menu to select NTSC.
8.
Press to return to
SETUP
9.
Press the key on the printer to print images from the Cypress system.
PRINT
10.
(RED AND WHITE AUDIO, AND
GRAY SVHS CABLES ARE NOT
USED WITH VIDEO PRINTER
Connecting a Video Printer
FIGURE 49.
ACUSON Cypress™ Operator's Manual
SETUP
mode or press
2D
15-PIN CONNECTOR ON CYPRESS
VIDEO DISTRIBUTION CABLE
CONNECTIONS)
function key to display the Setup
to begin imaging.
2D
YELLOW VIDEO
CONNECTION
VIDEO
IN
PRINTER