Making Changes To The Current User-Defined Preset; Reload Preset With New Patient - Siemens ACUSON Cypress Operator's Manual

Making Changes to the Current User-Defined Preset

The [ ] button lets you make changes to the currently loaded user-
UPDATE
defined Preset. For example, to include Sector Angle 2 in the user-defined pre-
set, make the adjustment to the Cypress and then follow these steps:
Press the key.
SETUP
1.
Highlight the Presets heading.
2.
Click [ ]
UPDATE
3.

Reload Preset with New Patient

Presets can be reloaded each time new patient data is entered. To enable this
feature, follow these steps:
Press and double-click the Presets heading.
SETUP
1.
Highlight the Reload with New Patient option.
2.
Place a checkmark in the Enabled box. The Preset is loaded when live
3.
imaging begins.
NOTE If a Preset is removed (i.e., deleted) after [LOAD] is clicked and
before the start of live imaging, the factory default Preset will be
loaded.
ACUSON Cypress™ Operator's Manual
The Presets Menu
3-15