Siemens ACUSON Cypress Operator's Manual page 233

Go to the Shutdown tab to view the progress of the transfer or press the
9.
key to exit the menu.
NOTE You can operate the Cypress system while the transfer is in progress
with the exception of the following restrictions:
— You cannot activate a study that has been designated for transfer.
— An active study automatically deactivates when designated for
transfer.
NOTE Studies stored in the
Cypress system for viewing.
NOTE Segments of the same study can be sent to different destinations in
different formats. For example, an entire study can be sent to the
Cypress internal
(flagged) loops can be sent to a network server, and the report and
selected (flagged) loops can be sent to a computer.
Send Screen DICOM Compression Fields
TABLE 43.
Field
DICOM
Compression
ACUSON Cypress™ Operator's Manual
format cannot be copied back to the
DICOM
disk drive in the Cypress format, selected
MO
Description
Sets the compression settings. The selected com-
DICOM
pression is applied to studies saved in
are saved to the disk or saved over a network to a
MO
server (if the Network option is installed).
DICOM
None: Use when a server or viewer does not support
or Lossless compression. The largest image
JPEG RLE
files are produced with this selection.
Lossless: Select this format when a lossless data
RLE
compression format is desired. This format preserves
the quality of the image. The compression generally
results in a data size reduction of approximately 3:1.
Lossy: A lossy compression format may result in
JPEG
some degradation of the image, depending on the
compression setting. However,
results in significantly smaller file sizes than the
compression format.
Compression: The
JPEG
— a setting results in a higher image quality
LOWER
and larger file sizes.
— a setting results in lower image quality and
HIGHER
smaller file sizes.
Transferring Studies
format that
DICOM
compression
JPEG
Compression scale.
JPEG
2D
RLE
9-19