Quad-Screen Soft Windows; Viewing Additional Loops In A Quad - Siemens ACUSON Cypress Operator's Manual

Quad-Screen Soft Windows

Table 40 describes how the Soft Windows operate in quad-screen mode.
Quad-Screen Soft Windows
TABLE 40.
Window/Function
Next Loop
Sel Quad
View/Stage
End/Start

Viewing Additional Loops in a Quad

To view additional loops in a quad, follow these steps:
Turn the
SEL QUAD
1.
Turn the
NEXT LOOP
2.
the top left corner of each quad indicates the number of the loop currently
playing.
ACUSON Cypress™ Operator's Manual
Description
Turn the
NEXT LOOP
series of loops for a highlighted quad.
Turn the knob to highlight (i.e., select) a
SEL QUAD
quad.
View and Stage share the same Soft Window. Press
the corresponding Small Window knob to display and
activate the function.
When is selected, the quad screen displays
VIEW
the same view captured during the protocol. Use
to shuffle the loops for a side-by-side compari-
VIEW
son. If the stress protocol has more than four views,
turn the knob to display additional pages.
Use to display the images captured during
STAGE
each stage of the protocol (for example, to display
the loops captured during the resting stage). If the
stress protocol has more than four views, turn the
knob to display additional pages.
This is a multi-functional soft window. Use the corre-
sponding knob to trim frames from either the end or
start of a loop. Use the
loop and then use the
frames.
(select quad) knob to move the box to the desired quad.
knob to display the additional loops. The loop counter in
Conducting a Stress Echo Protocol Exam
knob to select the next loop in a
knob to highlight a
SEL QUAD
knob to trim the
END/START
8-19