Pulsed Wave Doppler (Pw) Scanning; Pw Gain; Baseline; Scale - Siemens ACUSON Cypress Operator's Manual

THE HIGH PASS
FILTER SETTING
THE SCALE
DEPENDS ON THE
TRANSDUCER
FREQUENCY
Pulsed Wave Doppler (
To activate Pulsed Wave Doppler imaging mode, press the
Active system controls related to
pages.
SYSTEM DATA
(See "Cypress System
Data" on page 5-9)
3V2c Pwr M
MI 0.9 TIs 0.1
Comp 2
GN 05/ /13
HPF 700Hz
Harmonic
2.0
1.0
0.0
1.0
2.0

Baseline

PW MODE SOFT WINDOW
MENU OPTIONS
See Table 22, "PW Scanning
Soft Windows Options," on
page 5-45.
The PW Scanning Screen
FIGURE 32.
ACUSON Cypress™ Operator's Manual
) Scanning
PW
operation are described on the following
PW
KNOB CONTROLS THE LOCATION
PW DOPPLER
OF THE BASELINE—THE BASELINE
SPECTRAL
DISPLAY
Volume

PW Gain

PRESS THE MAIN KNOB
TO SWITCH BETWEEN
VOLUME AND PW GAIN

Pulsed Wave Doppler (PW) Scanning

mode key.
PW
THE BASELINE SOFT WINDOW
SLIDES UP AND DOWN.

Scale

Sweep
MULTIFUNCTION
SOFT WINDOW
SWITCHES
BETWEEN SCALE
AND FILTER.
5-43