Tools - Siemens ACUSON Cypress Operator's Manual

[ ] BUTTON
IMAGE
CONTROLS:
In Active Mode:
Transmit Power
Lateral Gain
Post Processing
Colorize
Structure Persistence
Left-Right Invert
Angle
In Freeze Mode:
Colorize

Tools

2D
Pressing the function key in
TOOLS
buttons. These buttons provide controls for secondary image functions. See
Table 17 on page 5-28 for a description of the
TRANSMIT POWER
3V2c Pwr M
MI 1.0 TIs 0.1
Comp 2 PProc 3
GN 5/ /
45fps 16.2cm
Harmonic
Tools
2D
FIGURE 27.
To use the Tools functions, follow these steps:
Start a scan by pressing the
2D
1.
Press the
TOOLS
2.
Select one of the Tools buttons:
3.
Click [ ] to open a menu of adjustable controls. This menu differs
IMAGE
depending on whether you are in Active mode or Freeze mode. Use the
Trackball to highlight the desired option and press <
sub-menu for the selected option, another window opens. Highlight the
desired option and press <
to exit the menu. To exit the menu without activating the change, highlight
Cancel and press <
Click [ ] to add text to an image in either Freeze or Active mode.
TEXT
Click [ ] to capture a selected area of the image using the
ROI
of Interest) box.
Click [ ] to start the time counter.
TIMER
ACUSON Cypress™ Operator's Manual
scanning mode opens a series of control
2D
SUB-MENU FOR
Low
Med
High
Cancel
mode key.
2D
Function key to display the menu of
> to activate the change. Press
ENTER
>.
ENTER
Tools functions.
2D
IMAGE FUNCTIONS IN
ACTIVE MODE WINDOW
Transmit Power
Lateral Gain
Post Processing
Colorize
Struct Persistence
Left-Right Invert
Angle
Cancel
tools.
2D
ENTER
2D Scanning
2D MODE
TOOLS
BUTTONS
Image
Text
ROI
Timer
>. If there is a
TOOLS
(Region
ROI
5-27