Explanation Of Dicom Menu Fields - Siemens ACUSON Cypress Operator's Manual

Transferring Studies
9-6

Explanation of DICOM Menu Fields

Table 41 and Table 42 on page 9-7
NOTE Server information and Cypress system information can only be
entered or changed if the Network option has been installed.
DICOM Server Information Fields
TABLE 41.
Field
Server Name
Application
Entity
Server IP
Address
Port Number
Test Result
Ignore Server
Response
Accept
Storage
Commitment
ACUSON Cypress™ Operator's Manual
describe the DICOM fields on the Setup menu
Description
Identifies the individual server with a name you choose.
By clicking on the arrow you can select from up to four
different servers.
Identifies the server application that receives the images
from the Cypress system. The alphanumeric string
entered in this field must exactly match (including case)
the application entity name assigned to the server appli-
cation.
The server IP address of the
will be sent.
The remote port on the server that is to receive the con-
nection request and the image data. The default setting is
104.
Lets you know if the connection has been made success-
fully. After changing any of the three server parameters,
click the [ ] button. The system will test the con-
VERIFY
nection and indicate its results in this field.
When the box is checked, the Cypress system ignores all
response statuses from the server.
When the box is checked, the Cypress system will query
the server to verify that all images in the study
DICOM
have been properly received and stored. Check the shut-
down page for messages.
server where images
DICOM
.