Siemens ACUSON Cypress Operator's Manual page 204

Stress Echo
8-16
captured loops press the
Window knob. Press
for all four views have been saved.
To assign a label to the loops, press the
knob to display each loop. Display the loop that you feel contains
LOOP
the greatest amount of diagnostic information. If you are not happy with
any of the loops, press the
Once you have selected a loop—and the loop is playing—turn the
Soft Window knob to display the corresponding label. The view
TOCOL
counter displays a "1" next to the selected view. Numerous loops can be
stored for each view and are available for review in the quad display.
Continue labeling the loops until all four views contain at least one loop.
Go to Step 8.
Q SAVE
Turn the
PROTOCOL
View label turns white indicating it is the active view. Begin scanning
LAX
the patient starting with the
mized, press
Q SAVE
Cypress system stores one loop that is automatically labeled
view counter registers a "1" next to
to the view label.
SAX
To view the captured loops, press the
Soft Window knob. Press
PLAY LOOP
scanning until loops for all four views have been saved.
Once a loop has been captured for the
cally advances to the Impost stage.
Go to Step 9.
When all Rest loops and Base loops have been captured and labeled:
8.
— For 2-Stage: Turn the
Post Stage). "Impost" is displayed in the lower left corner of the screen, and
the view counters are reset to zero.
— For 3-Stage: Press
display Peak. "Peak" is displayed in the lower left corner of the screen, and
the view counters are reset to zero.
— For Pharmacological: Press
knob to display Low. "Low" is displayed in the lower left corner of the screen,
and the view counters are reset to zero.
ACUSON Cypress™ Operator's Manual
function key and turn the
VIEW
to exit View mode. Continue scanning until loops
2D
VIEW
key to continue scanning and saving loops.
2D
Soft Window knob to display the Rest
view. Once the image has been opti-
LAX
. If you set the
QSAVE
and then automatically advances
LAX
VIEW
2D
AP2
knob to display Impost (Immediate
PROTOCOL
to exit View mode. Turn the
2D
to exit View mode. Turn the
2D
PLAY LOOP
key and turn the
LAX
Time Limit to 1 Cycle, the
LAX
function key and turn the
to exit View mode. Continue
view, the system automati-
PROTOCOL
PROTOCOL
Soft
PLAY
PRO-
label. The
. The
knob to