Removing A Label; Changing The Roi Position; Deleting Loops; Changing A View Or Stage Label - Siemens ACUSON Cypress Operator's Manual

Stress Echo
8-20

Removing a Label

To remove a label from a loop, follow these steps:
Display the loop in the full-screen format.
1.
Turn the
PROTOCOL
2.

Changing the ROI Position

To change the position, follow these steps:
ROI
Turn the
SEL QUAD
1.
To display the loop in full-screen, press the
2.
If the box is not displayed, press the
ROI
3.
Use the Trackball to change the position of the
4.
To display the quad-screen, press the
5.

Deleting Loops

NOTE Deleted loops cannot be recovered.
To delete loops, follow these steps:
Turn the
SEL QUAD
1.
To display the loop in full-screen, press the
2.
Turn the Soft Window knob to display the confirmation window. Use
DELETE
3.
the Trackball to highlight [
the loop, press <
ENTER
To return to the quad-screen display, press
4.

Changing a View or Stage Label

To change a view or stage label, follow these steps:
Turn the
SEL QUAD
1.
To display the loop in full-screen, press the
2.
Turn the
PROTOCOL
3.
label.
To return to the quad-screen display, press
4.
ACUSON Cypress™ Operator's Manual
knob until no labels are displayed.
knob to move the
ROI
VIEW
Soft Window knob to move the box to the desired quad.
] if you do not want to delete the loop. To delete
NO
>.
Soft Window knob to move the box to the desired quad.
Soft Window knob to display the desired stage/view
box to the desired quad.
key.
VIEW
key and click [
TOOLS
box.
ROI
key.
key.
VIEW
.
VIEW
key.
VIEW
.
VIEW
].
ROI