Turning The Cypress System On And Off; Turning The Cypress System On - Siemens ACUSON Cypress Operator's Manual

Turning the Cypress System On and Off

Before turning the Cypress system power
The supplied power cord is securely inserted into the receptacle at the back
of the unit.
The power cord is securely plugged into a properly grounded wall outlet. See
the on page 10-2.
WARNINGS

Turning the Cypress System ON

To turn the system
ON:
Press the switch located above the power cord receptacle. Press the "–" side
1.
of the rocker switch.
The system goes through its boot-up sequence. If User Accounts are enabled,
the Login window opens (see "Logging On and Off of the Cypress System" on
page 1-5 and "Setting Up User Accounts" on page 1-7 for more information). If
User Accounts are not enabled the 2D screen appears and the system is ready
for use.
WARNING Never turn the system
up, as this may cause a fatal error. Always wait until the
screen appears before turning the system
FUSE BOX
POWER
SWITCH
POWER
CORD
Cypress System Power Switch
FIGURE 2.
ACUSON Cypress™ Operator's Manual
Turning the Cypress System On and Off
, make sure that:
ON
when it is in the process of booting-
OFF
– o
2D
.
OFF
ECG
CONNECTION
1-3