Activate The Pw Display; Main Knob Controls Pw Gain And Volume - Siemens ACUSON Cypress Operator's Manual

Scanning
PW
TO SWITCH
BETWEEN
VOLUME AND
GAIN, PRESS
THE MAIN KNOB
5-44
Activate the
PW
To activate the spectral display, follow these steps:
PW
Press once. The
PW
1.
cursor line.
Position the cursor to the desired portion of the image, and press
2.
ond time. This freezes the
Pressing again toggles between the active spectrum and the real-time
PW
3.
sector image. You may also reposition the
frozen. The cursor line in the
frozen.
Main Knob Controls
When you press the
They are controlled by the Main knob. Press the Main knob to toggle between
the options.
Volume Increases or decreases the amplification of the audio signal sent to
the system speaker.
Gain Turn the knob clockwise to increase the amplification of the Dop-
PW
pler signal. Turn counterclockwise to decrease.
In Freeze mode, turn the Main knob to scroll through the frames.
ACUSON Cypress™ Operator's Manual
Display
sector is live and the Trackball is assigned to the
2D
image and activates the
2D
image will move, but the
2D
Gain and Volume
PW
mode key two options appear—Volume and PW Gain.
PW
spectral display.
PW
sample while the
PW
image remains
2D
PW
a sec-
PW
image is
2D