Saving Image Data - Siemens ACUSON Cypress Operator's Manual

Saving Image Data

The results of a scan are an image or a series of images. This section describes
how images are saved.
Frame: The lowest level; a single image that can be viewed and printed.
Press the
FREEZE
acquired image on the screen as a still frame (press
scanning).
Loop: A series of frames. Press the
knob to display each loop one by one. Press
LOOP
ture the loop while it is playing.
Series: A series of consecutive loops. Press the
the knob to display
PLAY LOOP
knob to view the series of consecutive loops in a seamless dis-
PLAY SERIES
play. Press or
•SAVE
series of loops can be viewed separately by pressing the
to display
PLAY LOOP
The key can be programmed to save 4, 8, 16, or 32 seconds of data. The
•SAVE
key can be programmed to save 1, 2, or 3 cardiac cycles when the
Q SAVE
patient's is properly displayed on the screen. When the
ECG
nected, the key captures 2, 4, or 6 seconds of data.
Q SAVE
NOTE When an
ECG
defaults to a time capture of 2 seconds per loop.
ACUSON Cypress™ Operator's Manual
key to suspend active scanning and display the last
EACH DOTTED VERTICAL LINE
REPRESENTS A SINGLE FRAME.
A SINGLE CARDIAC CYCLE IS COMPOSED
OF MULTIPLE
FREEZE
PLAY SERIES
to capture the series of loops. Each loop in a
Q SAVE
in the soft window.
A SERIES OF LOOPS CAN BE VIEWED IN
TWO FORMATS DEPENDING ON WHICH
LABEL IS DISPLAYED IN THE SOFT WINDOW.
THIS SHOWS THE PLAY SERIES FORMAT.
is not connected to the patient, the Cypress system
Overview of the Scanning Process
again to resume
FREEZE
FRAMES.
key and then turn the
or
•SAVE Q SAVE
A SERIES OF LOOPS CAN BE VIEWED
IN TWO FORMATS DEPENDING ON
WHICH LABEL IS DISPLAYED IN THE
SOFT WINDOW. THIS SHOWS THE
PLAY LOOP FORMAT.
key and then press
FREEZE
in the soft window. Turn the
PLAY SERIES
ECG
PLAY
to cap-
knob
is not con-
5-5