Selecting A Report Format; Selecting A Report Background; About Default Sites For Vascular; Adding Default Sites For Vascular - Siemens ACUSON Cypress Operator's Manual

Selecting a Report Format

Press the key and click the Calculations heading.
SETUP
1.
Click Reports.
2.
Select the Configured format to display the sections of the report where
3.
data has been entered.

Selecting a Report Background

Press the key and click the Calculations heading.
SETUP
1.
Click Reports.
2.
Select either a light background or a dark background.
3.

About Default Sites for Vascular

Default vascular sites appear in the calculations menu and can be specified by
the user. The following procedures describe how to add, edit, delete, and man-
age default sites.

Adding Default Sites for Vascular

To add vascular sites to specific exam types, follow these steps:
Press , double-click Calculations, and highlight Vascular Sites.
SETUP
1.
Select the specific Exam Type (for example, Carotid), from the pull-down
2.
menu.
Select a calculation type (for example, %Stenosis). This opens a factory-
3.
defined list.
To add sites to the list, click [
4.
Either scroll through the list or start typing (for example, vertebral) and the
5.
list will automatically find the word as you type.
Complete the site specifications (artery or vein, right or left, etc.) using the
6.
radio buttons.
Click [ ].
OK
7.
Continue adding sites for the selected calculation type by repeating steps
8.
4—7.
NOTE For Ratios, remember to complete the specifications for both sites.
NOTE The site labels are abbreviated in the menu. The abbreviations are
displayed at the top of the Add window and in the Calculations menu.
ACUSON Cypress™ Operator's Manual
].
ADD
Vascular Calculations Setup
7-5