4.7.4
Installing an ADSL Module
Installation Procedures
Step
1.
Connect the carrier's ADSL line to slot 1 and 2 of the X2 connector (voice output).
In the CND version, connect the carrier's ADSL line to slot 1 of the X2 connector.
2.
Connect slots 3 and 4 of the X2 connector to the external line input for the HiPath
1100.
In the CND version, connect to slot 2 of the X2 connector.
3.
Connect your network cables to the HUB (J3, J5, J6 and J7 connectors).
4.7.5
Installing an EVM Module
4.7.5.1
On the HiPath 1120
Installation Procedures
Step
1.
Turn off the power supply.
2.
Remove the system's cover
3.
Attach the separator provided with the module to the MB.
4.
Attach the module to the MB's pin connector and to the separator.
5.
Reassemble the entire set.
6.
"Performing a Visual Inspection" on page 4-59.
7.
Turn on the power supply.
8.
Configure the required data (see "Operation" on page 6-1).
A31003-K1160-S100-03-7620
Service Manual
Installation of Expansion and Option Modules
Procedure
Procedure
Installation
4-25