Siemens HiPath 1100 Service Manual page 273

Alert Ring Timeout for Pickup Groups (035)
Incoming calls are signaled on standard telephone sets within a pickup group (Code 43); in
telephones without a display they are signaled by an alert ring signal. The duration of the ring
tone can be specified.
Callback/Urgent Call Activation after Timeout (037)
When an extension or external number (on an ISDN digital line) is busy, this configuration
allows you to set a timeout for activating the Recall or Urgent Call features after approximately
7 seconds.
Call Name/Number Display (039)
This setting specifies the type of Caller ID information that will be shown on the telephone
display.
UCD Subscriber Groups (023)
This setting creates a group of extensions that can receive internal and external calls.
A Subscriber Group is a group of extensions available for answering calls made to a specific
number assigned to it.
An internal or external call directed to this group will be answered by the extension that has
been free the longest.
In the event that all extensions in the group are busy external calls are routed to a hold queue.
Collect Call Barring for UCD Group (007)
When collect call barring is activated, all collect calls are automatically rejected by the system
(for Brazil only). The system bypasses Collect Call Barring for members of a UCD Group, that
is, call barring for the group is only verified.
If a call has been answered at least once by the system, Collect Call Barring cancels
the blocking.
When an incoming call over a digital line is forwarded for not being answered (*14)
and Collect Call Barring is activated, the call will ring at the first DID for the external
line.
Message Waiting for UCD Queue (024)
This feature lets you assign a message or Music On Hold for a UCD Group extension when all
extensions in the group are busy or unavailable.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-35