Siemens HiPath 1100 Service Manual page 285

Interdigit Pause Time Setting (227)
It lets you configure a pause ("P") between MF digits. This can be used when programming
System and Individual Speed Dialing, system telephone programmable keys or for activating
Suffix Dialing.
This period of time can be set from 1 to 5 seconds. The default setting is 2 seconds.
To insert an interdigit pause you must enter the "P" character using the HiPath 1100
Manager or pressing the Redial Key using a system telephone.
Each "P" character inserts a 2-second pause (default) in the connection. A longer
pause can be inserted by entering more than one character (for example, for a 4-
second pause enter "PP")
The first "P# or #" specifies that the next digits for A will only be forwarded if:
- External digital line or S0 extension:
P# - DTMF digits are sent after local carrier identification, when B is not answered.
# - DTMF digits are sent after B is answered.
- External analog line or analog extension:
P# or # - DTMF digits are sent after B is answered.
Other characters ("#" and/or "*") may be added after "P#".
Caller List Type (049)
This setting specifies whether only external calls or all internal and external calls should be
displayed in the Caller Lists.
Deleting digits from the Caller List (171)
Specifies the digits that do not need to be repeated when making a call.
Date/Time - Manual Setting (114)
Sets the current Date and Time for the system. When the default configuration is restored (99),
the Date setting displays information about the date the software was create and will display
the time as 12:00.
Date/Time Automatic Update (038)
This setting allows automatic synchronization of the system's date and time through the local
carrier, during an external call.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-47