Siemens HiPath 1100 Service Manual page 270

Configuring the system specifically for the client
Comments about the System's Programming Codes
Maximum time between rings for an incoming call (117)
This setting defines a time interval of approximately 6 seconds between two pulses transmitted
by the local carrier. At the end of this time interval, the system disconnects from the external
line and gets ready to receive other calls.
Coefficient for an external analog line (147)
This function couples the impedances for a system and the public network external analog line
to which it is connected.
Polarity Inversion (158)
If your Carrier provides this feature, call detail recording occurs in real time. That is, when the
called party answers the phone, the public exchange sends a signal for the system to start call
detail recording.
Tone Detector (160)
This setting has the system wait for a dial tone detection on the public exchange before making
it available to the user. With Standard MF telephones the number dialed will be transmitted to
the external line approximately 4 to 5 seconds after the last digit is dialed.
Connection Type (133)
This setting determines whether the Group of external lines that is connected to one of the
HiPath 1100 systems is also interconnected to another C.O. or PABX.
Second External Access Code (134)
This setting determines the code to be sent by the Satellite PABX in accordance with the
access code for external lines on the Master PABX. This code is used for determining the
availability of a dial tone on an external line.
Auto-Seizure Mode for an External Line (036)
This feature dials an external call when the handset is lifted, without using an access code (e.g.,
0). When this setting is selected you must enter a code to dial internal calls or activate the
Extension key.
Activating this feature may impact the programming of the Dialing Mode (Code 68),
assuming option 0 (Automatic ID) is selected. It is recommended that you reconfig-
ure the Dialing Mode (Pulse or Tone) for the extensions.
7-32
A31003-K1160-S100-03-7620
Service Manual