Batteries - Siemens HiPath 1100 Service Manual

Contact
25 50 V
42 V
AC
Table 3-36 PSU Connector Assignments for HiPath 1150/1190/1190R
3.8

Batteries

In the event of an AC power outage, the HiPath 1150/1190/1190R system can be powered with
batteries. The system requires 2 batteries (2x12V) connected in series through a FastOn
connector. Battery duty cycle varies according to the capacity of the battery installed.
Note: The pwoer supply used with the system must provide an input for connecting batteries
(see Capítulo 3.7, "Power Supply Unit (PSU)" na página 3-54).
Warning
!
FAILURE TO REPLACE BATTERY WITH SPECIFIED BATTERY TYPE CAN CAUSE
RISK OF EXPLOSION. DISCARD USED BATTERIES ACCORDING TO INSTRUC-
TIONS.
Connection Cable
For connecting the batteries to the HiPath 1150/1190/1190R power source (see
Capítulo 4.7.9, "Installing a Power Supply Unit" na página 4-35) and also for protection by
means of a fuse.
Figure 3-35 Interconnect cable with safety fuse
A31003-K1160-S100-03-7620
Service Manual
Function
+ 97 V
AC DC
+ 85.8 V (RSA)
DC
Fuse
Contact
26 50 V
42 V
AC
+
-
Function
+ 97 V
AC DC
+ 85.8 V (RSA)
DC
Batteries
2 x 12V
(serially)
- +
- +
12V
12V
Modules
Batteries
3-58