A31003-K1160-S100-03-7620 Service Manual - Siemens HiPath 1100 Service Manual

12
14
14
16
16
Table 2-2 Possible combinations of external analog and digital lines (TME1 Module)
HiPath 1190 Note
The HiPath 1190 system with a single rack supports up to 80 extensions
●
TME 1 Module
●
It must only be mounted in slots 1 and 11. The system must thus have both racks mounted
in order to run two modules.
Within the maximum limit of 32 external analog lines or 45 external digital lines and 140
extensions, the system may consist of, for example:
Slot
2 x EB 800, 2 x EB 012 or 2 x EB 210 or 1 x TME1 in slot 1 (in this case slot 2 must
1 and 2
remain free).
Module configuration for extensions or external lines must not exceed 32 ports (e.g., 3
3, 4 and 14
x EB 010 or 2 x EB 012 or 2 x EB 210).
5, 6 and 7 Module configuration for extensions or external lines must not exceed 32 ports.
8, 9 and 10 Module configuration for extensions or external lines must not exceed 32 ports.
Module configuration for extensions or external lines must not exceed 32 ports or 1 x
11, 12 and
TME1 in slot 11, and 1 x EB 010, EB 012 or EB 210 in slot 13 (in this case slot 12 must
13
remain free).
15, 16 and
Module configuration for extensions or external lines must not exceed 32 ports.
17
18, 19 and
Module configuration for extensions or external lines must not exceed 32 ports.
20
Table 2-3 Examples of HiPath 1190 System Configurations
Each of the system's Highway supports up to 32 ports. For example, Highway 2
(slots 3, 4, and 14) can accommodate two EB 800 and one EB 206, totalling 24 ports.
However, for Highway 1 (Slots 1 and 2), when a TME1 module is placed in Slot 1
(totalling 30 ports), Slot 2 must remain free (except for an ASDL module, which can
be installed in Slot 2).
A31003-K1160-S100-03-7620
Service Manual
4
3
2
1
0
Modules
Limitations to System Expansion
16
17
16
17
16
System Data
2-7