Programming The System Using A Pc - Siemens HiPath 1100 Service Manual

Operation

Programming the system using a PC

Programming Extension: * 95 +31994 + 80 + (XXXX (new password) + XXXXX (confirm
●
new password)
Make a note of the new password and store it in a safe place.
●
If you forget your password, you can use the following code sequence to regain ac-
cess for programming:
# + 95 + 31994431.
●
This information should not be made available to the user.
6.2 Programming the system using a PC
The system CD contains the software packages required for installation using a PC (see
"HiPath 1100 Applications" on page 6-50).
Follow these steps and note the following when programming the system by using a computer:
Topic
Basic Requirement:
Software Installation
Basic Requirement:
Standard IBM PC, Pentium 333 MHz processor (minimum);
●
128 MB RAM (minimum)
●
Microsoft Windows 98 SE, Windows 2000, Windows ME or Windows XP;
●
SVGA Color Monitor, 800x600 resolution (minimum)
●
Free disk space: 150 MB (minimum).
●
Installation:
The system may be programmed using a computer by selecting one of the following options
:
PC connection <--> HiPath 1100
Local connection
With a V.24 Serial Interface
With an USB Interface
With an ADSL Module (LAN)
6-3
Page
6-3
6-3
Page
6-16
6-16
6-4
6-6
A31003-K1160-S100-03-7620
Service Manual