Siemens HiPath 1100 Service Manual page 326

M
Main Distribution Frame (MDF) 3-58, 3-59
Modules 3-1
Overview 3-1
Motherboard (MB) 3-8
HiPath 1120 3-8
HiPath 1150 3-14
O
Option Module (OM)
TME1 module 3-33
Option Modules (OM) 3-45
CD 16 module 3-51
S0 module 3-29
UP0/E Module and CTR UP0/E Module.
3-42
Option modules (OM)
ADSL module 3-45
Fax/DID module 3-49
Option Modules(OM) HiPath 1120
Music module 3-52
P
Performing a Visual Inspection 4-59
Power Supply Unit (PSU) 3-54
Power Systems 2-1
Powering/Protecting the System 4-52
Profiset 3030 System Telephone 5-2
Programming
Digital trunk 7-23
Programming an Extension 7-6, 7-34
Programming Comments 7-27
Programming Mode 6-1
Programming Mode Syntax 6-2
Programming with a computer 6-3
Protection of External Lines and Extensions
4-53
Protective Power Outage Relays 4-55
PSU specifications
HiPath 1120 3-55
HiPath 1150/1190 3-56
R
Relay and Sensor configuration on the HiPath
Z-2
1120 7-25
Remote Administration 7-15
Run quick test 7-26
S
S2M Maintenance 6-53
Safety Information 1-1
caution 1-3
warning 1-3
Safety information
danger 1-2
Safety Symbols 1-1
Select the location for installing the equip-
ment 4-4
Size of the HiPath 1120 system 4-5
Size of the HiPath 1150 system 4-7
Size of the HiPath 1190/1190R 4-9
Size of the HiPath1190/1190R 4-9
System Cabling 4-56
System Data 2-1
System Telephone Feature Keys 5-12
System Telephone Settings 5-12
System Telephones 5-1
T
Table of the System's Programming Codes
7-1
Technical Standards and Compliance 2-10
Telephones 5-1
TFE Entrance Telephone Interface 3-62
TME1 Coax Cable 3-69
TME1 Module Connector Assignments 3-35
TME1 Serial Cable 3-68
U
Unpacking System Components 4-4
Updating the Software 6-54, 7-15
USB adapter cable 3-67
Using a Telephone Set 6-2
V
V.24 Adapter Cable 3-65
Voice Mail 7-12
A31003-K1160-S100-03-7620
Service Manual