Disa; Feature - Siemens HiPath 1100 Service Manual

Configuring the system specifically for the client
Comments about the System's Programming Codes
This configuration is available through a CTI interface.
●
The system allows up to 50 Call Forwarding numbers.
●
Conditional Call Forwarding has priority over an unconditional Call Forwarding.
●
Conditional Call Forwarding cannot be used on a S
●
Functions: The extension has permission for Conditional Call Forwarding and the
system is connected to a PC running a TAPI application.
1. Conditional Call Forwarding rules and conditions for a specified extension can
be defined by using a Windows TAPI application
2. Apply the settings to the extension desired.
3. From this moment on the extension will be forwarded.
Permission for Conditional Call Forwarding (098)
This allows a conditional forwarding to occur.
7.2.4

DISA

This setting allows you to make an external call from an external telephone (as if it was an
extension) through your system. In addition, the following features can be activated or
deactivated: Call Forwarding, Feature Deactivation, Conference, Night Service, Suffix-Dialing,
Door Opener, Electronic Lock, Individual Speed Dial, System Speed Dial, Relay, and Do Not
Disturb.
Only one external call can be made or one feature can be used at a time. After suc-
cessful activation of a feature, the call is immediately terminated. In the case of a
call, it is terminated right after a caller hangs up.
TAPI only monitors physical ports. To operate correctly, a DISA feature must use
special ports, and those cannot be monitored. If a physical port is used when the
DISA feature is active, the TAPI will be able to monitor it.
DISA Permission (018)
This setting specifies an extension for using the DISA feature.
MSN DISA (019)
This specifies from which MSN the DISA features will run.
7-44
extension.
0
A31003-K1160-S100-03-7620
Service Manual