Siemens HiPath 1100 Service Manual page 237

7. Incoming call over an external digital line to Extension 12, forwarded to the VMIe Group
configured as second Attendant. ***4**********12*4;
8. Direct internal call from Extension 1015 to Extension 1011, forwarded (*11) to the VMIe
Group: ***3**1015**1011*1;
9. Direct internal call from Extension 10015 to Extension 10011, forwarded to the VMIe Group
configured as second Attendant. ***4*10015*10011*1.
Voice Mail protocol for the system:
The Voice Mail signals to indicate when there is a message waiting at an extension's mailbox.
This is done via a DTMF service code (*68) followed by the extension number. When a
message is erased, a different DTMF code (#68) is used to deactivate the signal at the
extension that belongs to the VMIe Group. In the event these codes are not supported by the
Voice Mail System they can be re-programmed. Please check items " Deactivating the Internal
MWI #68" and "Activating the Internal MWI Internal *68" in the HiPath 1100 Manager "System
Settings - Service Code" folder.
Example:
1. The Voice Mail System indicates that Extension 13 has a message waiting in mailbox :
*6813;
2. The Voice Mail System indicates that the mailbox for Extension 12 is empty: #6812.
A31003-K1160-S100-03-7620
Service Manual
Operation
HiPath 1100 Applications
6-58