Capi Application Setup; Figure 6-48 Windows Xp - Msn - Siemens HiPath 1100 Service Manual

Operation
Driver Installation
Figure 6-48 Windows XP - MSN
7. The installation of the USB drivers is confirmed. Click "Finish."
8. A message appears informing that HiPath 1000 is being searched. Repeat driver
installation procedures for USB interface devices (Steps 1 to 3)
9. Click "Next" to proceed.
10. A message appears twice to the effect that the driver does not have a Windows logo. Click
"Continue" every time this message appears.
11. The installation of the USB drivers is now completed. CAPI applications installation will
now start automatically (see "CAPI Application Setup" on page 6-47).
6.3.2.3

CAPI Application Setup

CAPI application driver installation is very simple and is the same for all Windows operating
systems.
Upon conclusion of USB driver installation, the CAPI applications installation window will
appear. Proceed as follows:
1. In this window select the language you want to use and click "OK" to confirm.
2. When the Welcome window appears, click "Next" to proceed. Next, the installation window
will display the (default) path for installation of the CAPI applications (CallBridge for Data
Utilities). You can choose a different path by selecting "Browse." Click "Next" to proceed.
3. In the next window, create a new program folder or choose an existing folder in which to
store program icons for running the corresponding applications.
6-47
A31003-K1160-S100-03-7620
Service Manual