Table 7-24 Cdr Header Layout - Siemens HiPath 1100 Service Manual

– 6 = Transferred outgoing call
– 7 = 3-way conference with incoming
– 8 = 3-way conference with outgoing call
– * = Incoming call not answered yet = incoming call
Impulses (Call fees) with a TME1 Module installed.
●
Cost Code (Account code).
●
Example
Date Time
22.11.99 14:00:00
Table 7-24 CDR Header Layout
When a call is transferred, a new CDR record is created. The hold time at the external line is
accounted for by the extension that transferred the call.
Ticket Cost Code Ticket (095)
External calls can be assigned Cost Codes which provide more control over telephony costs
(see Functions Used During a Call - Cost Code, in the User Manual). This information may be
presented on the billing ticket.
Baud Rate (120)
The system can be connected to a PC or printer with a V.24 adapter to display or print the call
detail report. The communication speed can be set to ensure proper data transfer.
Digit Suppression in CDR Record (121)
This setting specifies how many end digits can be omitted in the data output when dialing a call
on an external line. They will be replaced by the symbol "?."
Call Detail Report for Incoming Calls (161)
When this option is selected, call details are shown in the CDR record.
For the system to receive Caller ID information over digital, E1 CAS/S2 or analog
lines the Caller ID feature must be enabled by a local carrier.
Caller ID service must be contracted with a local carrier.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
Ln Ext WCOS Ring
01 21 00:14
Duration Number
00:01:34 2222222
I Callfees Acc. code
1
7-57