Uninstall - Siemens HiPath 1100 Service Manual

3. In the next window, create a new program folder or choose an existing folder in which to
store program icons for running the corresponding applications.
4. To complete the installation process answer the introductory messages by clicking "Next"
Click "Finish" to close the installation window.
The following applications are then installed on your computer:
ISDN Setup Wizard (Windows 98 SE/ME)
●
CAPI Monitor
●
Uninstaller
●
FaxComm + Installation
●
Loopback Test
●
Outgoing Numbers Configuration (MSN) (Windows 2000/XP).
●
Restart the computer after installation of USB drivers and CAPI applications.
The USB drivers are Plug&Play compatible, so that after installation, the HiPath 1100
system may be removed and added again to the computer configuration - by simply
unplugging or connecting the USB cable. The drivers do not need to be reinstalled.
The equipment is ready for operation.
6.3.1.4

Uninstall

For the S connection, follow steps 1, 6 and 7 of the procedure ;
●
0
For the USB connection, follow steps 1 through 7 of the procedure below.
●
Procedure:
1. To exit CommServer right-click the CommServer icon on the Windows Status bar and
select "Exit"
2. Exit all online services for CallBridge for Data;
3. Unplug from your computer the USB cable connected to the HiPath 1100 system.
4. To remove the USB drivers, proceed as follows:
For FULL removal use Uninstall, or the Uninstall feature on the CD.
A31003-K1160-S100-03-7620
Service Manual
Operation
Driver Installation
6-32