Figure 6-20 Windows Me - Usb/Capi Installation Location - Siemens HiPath 1100 Service Manual

4. Select the "Search for the best CAPI for your device (Recommended)" checkbox then
select the "Specify a location" checkbox. Under Browse, select the directory where the
decompressed driver is stored. Drivers can be found on the CD, in the folder
\Software\USB Drivers. The driver is decompressed in C:\Temp (Default). If the
Administration driver is selected, the directory path will be
C:\Temp\HiPath1100_Adm_Drivers_040. If you select the Administration + CAPI Interface,
the directory path will be C:\Temp\HiPath1100_AdmCAPI_ Drivers_040. Select a folder
and click "Next";
Figure 6-20 Windows ME - USB/CAPI installation location.
5. A message will appear informing that a driver has been found. Click "Next" to proceed.
6. The installation of the USB drivers is confirmed. Click "Finish."
7. A message appears informing that HiPath 1000 is being searched. Repeat driver
installation procedures for USB interface devices (Steps 1 to 6)
To install administration drivers + CAPI Interface follow these steps:
8. During installation of the HiPath 1000 (CAPI Interface) configure these two settings:
9. A message will appear indicating that the best driver for the hardware has been found.
Click "Next" to proceed.
A31003-K1160-S100-03-7620
Service Manual
Operation
Driver Installation
6-24