Tac Smart - Telephony Advanced Control (Optional Software); Callreport (Optional Software); Vmie Protocol (Voice Mail Interface - Extended) - Siemens HiPath 1100 Service Manual

6.4.12

TAC Smart - Telephony Advanced Control (Optional Software)

This application can be used with the HiPath 1150/1190/1190R systems to help identify and
display all information about a specific call. It delivers key telephony functions to the user's PC,
including extension status monitoring, speed dialing capability, list of calls made and calls
received, contacts, all the while making calls automatically to a preset list of numbers.
This software integrates with other systems to display pop-up screens and send data to existing
applications.
6.4.13

CallReport (optional software)

CallReport is a billing system that allows you to record information about calls originated or
received by your PABX system.
CallReport runs on a regular PC under a Windows 95 / 98 /NT 4.0 / 2000 / XP environment. It
receives data sent by the PABX that are then processed and stored in a PC hard disk and
identified by extension, time, call duration, trunk, outgoing route and call cost. Based on this
data the software can generate reports including total costs per extension, sector, group, in
addition to traffic reports for both outgoing and incoming calls.
All information is defined in the CallReport database and can be handled by any user logged
in as Administrator.
6.4.14

VMIe Protocol (Voice Mail Interface - extended)

Voice Mail with analog connections require the VMIe protocol. Voice Mail communication takes
place via DTMF signals that contain the following information:
Type of Call (TOC)
Required item
1
Fixed size: 4 characters
Format: "***n" (n = code in table below)
Code Type of Call
1 Internal call to the Voice Mail System
3 Call Forwarding (*11)
5 Not used
7 Not used
A31003-K1160-S100-03-7620
Service Manual
HiPath 1100 Applications
Code Type of Call
2 Not used
4 Second Attendant (*14)
6 Not used
8 Not used
Operation
6-56