Auto Recloser Settings - ABB REC670 Applications Manual

1MRK 511 401-UUS A
14.2.3.2
Bay control REC670 2.2 ANSI
Application manual
Terminal '' Master "
Priority = High
SMBRREC (79)
ON BLOCKED
OFF SETON
BLKON INPROGR
BLKOFF ACTIVE
INHIBIT UNSUCCL
RESET SUCCL
PLCLOST READY
RI
CLOSEMD
RI_HS
PERMIT1P
SKIPHS
PREP3P
THOLHOLD
TRSOTF 1PT1
2PT1
CBREADY
3PT1
52a
3PT2
3PT3
SYNC
3PT4
WAIT
3PT5
RSTCOUNT
WFMASTER
Terminal '' Slave "
Priority = Low
SMBRREC (79)
ON BLOCKED
OFF
SETON
BLKON
INPROGR
BLOCKOFF
ACTIVE
INHIBIT
UNSUCCL
RESET
SUCCL
PLCLOST
READY
RI
CLOSEMD
RI_HS
PERMIT1P
SKIPHS
PREP3P
TRSOTF
1PT1
THOLHOLD
2PT1
CBREADY
3PT1
52a
3PT2
SYNC
3PT3
3PT4
WAIT
3PT5
WFMASTER
*) Other input/output signals as in previous single
breaker arrangements
ANSI04000137 V3 EN-US
Figure 119: Additional input and output signals at multi-breaker arrangement. The
connections can be made "symmetrical" to make it possible to control
the priority by the settings, Priority: High/Low

Auto recloser settings

The settings for the auto recloser are set using the local HMI (LHMI) or PCM600.
This setting guideline describes the settings of the auto recloser using the LHMI.
The settings for the auto recloser are found under Main menu/Settings/IED Settings/
Control/AutoRecloser(79,5(0->1))/SMBRREC(79,5(0->)):X and have been divided
into four different setting groups: General, CircuitBreaker, DeadTime and MasterSlave.
x
CB1
x
CB2
ANSI04000137-3-en.vsd
Section 14
Control
GUID-74980A07-CF89-488F-AB17-E5351D0032EE v1
345