Application - ABB REC670 Applications Manual

1MRK 511 401-UUS A
16.3.2
16.3.3
16.4
16.4.1
16.4.1.1
16.4.1.2
16.5
16.5.1
Bay control REC670 2.2 ANSI
Application manual

Application

Group alarm logic function ALMCALH is used to route alarm signals to different
LEDs and/or output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm
signal to physical tripping outputs according to the specific application needs.
Setting guidelines
Operation: Enabled or Disabled
Logic for group alarm WRNCALH
Identification
Function description
Logic for group warning
Application
Group warning logic function WRNCALH is used to route warning signals to LEDs
and/or output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to
adapt the warning signal to physical tripping outputs according to the specific
application needs.
Setting guidelines
OperationEnabled or Disabled
Logic for group indication INDCALH
Identification
Function description
Logic for group indication
IEC 61850 IEC 60617
identification identification
WRNCALH -
IEC 61850 IEC 60617
identification identification
INDCALH -
Section 16
Logic
GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
ANSI/IEEE C37.2
device number
-
493