Mitsubishi Electric CR750-Q Instruction Manual page 106

3Explanation of operation methods
4) Press function key continuously corresponding to "REL." to release the brake of the specified axis only
while the keys are pressed.
Only while the function key ([F1]) is pushing, the brake of the specified axis is released.
・ RH-3FH series, RV-2F/4F/7F series, RH-3FHR series:
・ RH-6FH/12FH/20FH series:
・ RV-13F series, RV-20F series, RV-50F series:
The brakes will activate when the function key or enabling switch is released.
<BRAKE>
J1:( 0 )J2:(
J4:( 0 )J5:(
J7:( 0 )J8:(
REL.
3-86 Operation of the origin and the brake screen
The brake is released continuously.
The brake is released in an off-and-on way.
(released → locked → released → locked →...)
J2 and J3 axis brakes are released in an off-and-on way.
(released → locked → released →locked →...)
The others are released continuously.
0 )J3:( 0 )
0 )J6:( 0 )
0 )
CLOSE
123
<BRAKE>
J1:( 0 )J2:( 0 )J3:(
J4:( 0 )J5:( 0 )J6:(
J7:( 0 )J8:( 0 )
REL.
123
1 )
0 )
CLOSE