Programming; Creating A Program; Opening The Program Edit Screen - Mitsubishi Electric CR750-Q Instruction Manual

3Explanation of operation methods

3.6 Programming

MELFA-BASIC V used with this controller allows advanced work to be described with ample operation func-
tions. The programming methods using the T/B are explained in this section. Refer to
Detailed explanation of command words"
description methods.

3.6.1 Creating a program

(1) Opening the program edit screen

1) Select "1. FILE/EDIT" screen on the <MENU> screen.
2) Press the function key corresponding to "NEW." Display the program name input screen.
<FILE/EDIT>
1
2
A1
B1
EDIT POSI.
Select the function [F3]
3) Input the program name. Display the command edit screen.
(Open the existing program, if the existing program name is inputted)
<NEW PROGRAM>
PROGRAM NAME
( 1_
Inputs "1" of program name [1] [EXE]
Edit of the constantly-executed program (ALWAYS attribute)
The program set as the constantly-executed (ALWAYS) attribute with the SLTn parameter once cancels the
attribute of the constantly executed, and edits it. Since the program of the constantly-executed attribute is
always executed, edit of it is impossible. Change ALWAYS into START with the SLTn parameter, re-turn on
the power supply of the controller, and stop the constantly executed.
Open the existing program.
Except how to input the existing program name as mentioned above, it is also possible to press the arrow
key on <FILE/EDIT> screen, and to press the function key currently assigned to "EDIT" in the condition that
the program is chosen.
3-34 Programming
1/20 Rem 136320
08-04-24 17:20:32 22490
08-04-24 14:56:08 694
08-04-24 13:05:54 2208
08-04-24 13:05:54 1851
123 NEW ⇒
COPY
)
ABC
CLOSE
in this manual for details on the MELFA-BASIC V commands and
<NEW PROGRAM>
PROGRAM NAME
<PROGRAM> 1
Page 168, "4.13
( )
ABC
DELETE
EDIT 123 INSERT
CLOSE
100%
⇒
TEACH