Finishing Of The Confirmation Screen; Test Operation; Select The Test Operation - Mitsubishi Electric CR750-Q Instruction Manual

(5) Finishing of the confirmation screen.

1) Press the function key corresponding to "CLOSE", and return to the <OPERATION> screen.
<PROGRAM> 1
1 Mov P1
2 Mov P2
3 Mov P3
4 Mov P4
123

3.13.2 Test operation

(1) Select the test operation

1) Press the [2] key in the menu screen, and display the operation menu screen.
<MENU>
1.FILE/EDIT
3.PARAM.
5.SET/INIT.
123
2) Press the [2] key, and display the test operation screen.
The program name, execution step number, and operating mode is displayed.
<RUN>
1.CHECK
3.OPERATION
123
3) When the function key ([F2]) corresponding to "CSTOP" is pressed during program execution, it is
change to the cycle mode of operation. The "CYCLE" is displayed after the mode and the [END] but-
ton of the operation panel blinks. Finish operation after executing the last line of the End command or
the program.
<TEST RUN>
1 Mov P1
PROG.NAME: 1
MODE: CONT.
CSTOP
50%
⇒
CLOSE
2.RUN
4.ORIGIN/BRK
6.ENHANCED
CLOSE
2.TEST RUN
CLOSE
STEP: 1
CLOSE ⇒
123
3Explanation of operation methods
<RUN>
1.CHECK 2.TEST RUN
3.OPERATION
123
<RUN>
1.CHECK 2.TEST RUN
3.OPERATION
123
<TEST RUN>
1 Mov P1
PROG.NAME: 1
MODE: CONT.
CSTOP 123
<TEST RUN>
1 Mov P1
PROG.NAME: 1
MODE: CYCLE
CSTOP 123
Operation of operating screen 3-71
CLOSE
CLOSE
STEP: 1
⇒
CLOSE
STEP: 1
⇒
CLOSE