Mitsubishi Electric CR750-Q Instruction Manual page 333

(5) If this command is executed after the OPEN command, the current open status will not change. In such
a case, it is necessary to close the line with the
OPEN command again.
(6) If an incorrect syntax is used, an error occurs when the program is executed, not when the program is
edited.
[Related parameter]
NETHSTIP, NETPORT
C_Date
[Function]
This variable returns the current date in the format of year/month/date.
[Format]
Example) <Character String Variable >=C_Date
[Reference Program]
1 C1$=C_Date
[Explanation]
(1) The current date is assigned.
(2) This variable only reads the data. Use the T/B to set the date.
[Reference]
C_Time
C_Maker
[Function]
This variable returns information on the manufacturer of the robot controller.
[Format]
Example) <Character String Variable >=C_Maker
[Reference Program]
1 C1$=C_Maker
[Explanation]
(1) This variable returns information on the manufacturer of the robot controller.
(2) This variable only reads the data.
[Reference]
C_Mecha
' "2000/12/01" is assigned to C1$.
' "COPYRIGHT1999......." is assigned to C1$.
Close (Close) command once, and then execute the
Detailed explanation of Robot Status Variable 4-313
4MELFA-BASIC V