Panasonic 1M Operation Manuals page 134

Screen Display
When the Menu Lamp is Flashing
Emergency Button
非常 非常
EMERG. EMERG.
Stop Alarm
復旧/警報音停止 復旧/警報音停止
Button
RESET/ STOP ALARM RESET/ STOP ALARM
Press this button to stop
火災 火災
the alarm sound, etc.
確認 確認
FIRE CONFIRM FIRE CONFIRM
MENU Button
メニュー メニュー
MENU MENU
終了 終了
OFF OFF
電源 電源
POWER POWER
解錠 開錠
UNLOCK UNLOCK
*The figure indicates a typical model.
■ Meanings of Major Screen Displays and Measures
Screen Display Meaning
A fire has broken out.
A gas leak has
occurred.
The gas and CO Alarm
has detected
incomplete combustion
(carbon monoxide).
The Emergency
Button or an Extra
Emergency Button
has been pressed
•
If you press the MENU Button when
the menu lamp is flashing, the menu
lamp turns off, and a notification
indicator appears on the screen.
•
Indicators on the screen will
disappear with no operation for 3
minutes or longer if they are alarm
indicators, or with no operation for 1
minute or longer if they are Notice
indicators, and then the menu lamp
will flash again.
Some screens do not appear depending on the equipment
or function settings of the building of your residence.
Measures
Check the situation and take appropriate measures
such as prompt initial fire-fighting, report, or
evacuation. The alarm sound will stop when you press
the Stop Alarm button or the detector is reset.
Page 76 to 77
Shut off the main gas valve and open the windows and
doors to ventilate the room.The alarm sound will stop
when you press the Stop Alarm Button or gas is gone.
Open the windows and doors to ventilate the room.
Stop using the device that is causing the incomplete
combustion. The alarm sound will stop when you press
the Stop Alarm Button or incomplete combustion is no
longer detected.
Confirm the details and take appropriate measures such as
informing the neighbors. The alarm sound will stop when you
press the Stop Alarm Button, or the Emergency Button or
Extra Emergency Button is reset.
When you have pressed the emergency button by mistake
Press the Emergency Button again.
When you have pressed an Extra Emergency Button by mistake
Reset methods vary depending on the equipment used.
Screen Display
*1
Call indicator: lit in yellow
■ Other Screen Displays
Detector Activation Display
Fire Dector Fault Display
(only for VGDT product number)
Page 76
*2 Earthquake Display *2 Earthquake Display
(Intensity 3 to less than intensity 5-lower) (intensity 5-lower or higher)
Page 90
Elevator Stopped Elevator Restored
Page 78
Page 93
Power Consumption Display
(without level indicator) Water Leak Display
Page 79
Page 88
*1
Can be changed to alarm display. Call display flashes in red. (
Installer
Setting
(Consult with the company that installed the system or the administrating company.)
Page 85
*2 "Intensity" and "estimated arrival time" do not appear if your apartment building uses simplified intensity
display.
Meaning
A parcel has been
delivered to the
Take the parcel out of the delivery box.
delivery box.
You have a message
from the Manager Call the Manager Room and check on the message.
Room.
The call button is
Check on the call and take appropriate measures.
pressed and you are
The call sound will stop when you press the Stop
being called.
Alarm Button or the call button is reset.
Some screens do not appear depending on the equipment
or function settings of the building of your residence.
Gas Detector Fault Display Security 1 Display
Page 78 Page 79
Earthquake Occurrence Display Earthquake Erroneous
(S wave sensor activated) Report Display
Page 90 Page 90
Wireless equipment failure Wireless unit battery
has occurred display is dead display
Page 93 Page 87
General Purpose General Announcement
Alarm Display
Page 86 Page 89
Measures
Page 38
Page 39
Page 80
Security 2 Display
Page 82 Page 83
*2
Earthquake Test Display
Page 91 Page 91
Power Consumption Display
(with level indicator)
Page 87 Page 88
Emergency Announcement
Display Display
Page 42 Page 42
Page 81)