Receiving A Call; Unlocking The Main Entrance - Panasonic 1M Operation Manuals

Receiving a Call

When there is a call from the Main Entrance, the Unit Entrance, the Manager Room, or Other Unit, you
can talk with the caller. When there is a call, the call sound sounds and the caller display (○○ is
calling) flashes on the screen.
If the cordless handset of the door phone is
equipped with a camera, the image of the visitor is
displayed. If those are not equipped with a camera,
or called from the Manager Room or Other Unit,
then the screen turns blue.
If you do not answer for about 30 seconds
after the call sound started, the image and
caller display are turned off automatically and
the call sound also stops.
If is displayed on the screen, images from
a separately installed camera can be displayed.
Refer to page 32 to show images from a
separately installed camera.
The image is recorded about 4 seconds after
the call sound starts (for 4 seconds).
Note
When the number of recordings exceeds the maximum
number of recordings possible, unprotected visitor records
are overwritten from the oldest one in order. (
1
Press the TALK button
After a beep, the caller display changes to lighting.
2
Talk
Even when you receive a call, you cannot
talk unless you press the TALK button.
A call from the Main Entrance, the Unit
Entrance, or another unit will end automatically
when one minute passes after start talking.
When the talk time is extended using the
extension function, it ends automatically after
the extended time has passed.
When calling the Manager Room,
starts to flash 4 minutes after starting
the conversation.
You can extend it by touching
during a call.

Unlocking the Main Entrance

1
While talking with the caller at the Main
Entrance, press the UNLOCK button
flashing in green
The Main Entrance is unlocked, the
UNLOCK button turns off for two
seconds, and then, flashes in green.
Note
● The Main Entrance can be unlocked even
while being called if images are shown.
● When you press the UNLOCK button while being
called or while talking, the image and talk will
automatically end after about 5 seconds.
電源
POWER
●Main screen: Displays the current image.
●Sub-screen: Repeatedly displays about a
Page 26)
3
Press the TALK button
After a beep, the talk will end.
Note
End by pressing the TALK button, otherwise
sound from the room will leak outside.
電源
POWER
Page 31
TALK button
(Luminous Unlock Button)
電源
POWER
Main screen
非常
EMERG.
復旧/警報音停止
RESET/STOP ALARM
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
OFF
解錠
UNLOCK
Caller display
通話
TALK
two-second image of the caller
operating the Lobby Phone to call.
Pressing the TALK button (to answer)
非常
EMERG.
will display the screen below.
復旧/警報音停止
RESET/STOP ALARM
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
OFF
解錠
UNLOCK
通話
TALK
*The sub-screen will not turn
on unless a separately
installed camera is connected.
非常
EMERG.
復旧/警報音停止
RESET/STOP ALARM
火災
確認
FIRE CONFIRM
UNLOCK
メニュー
button
MENU
終了
OFF
Flashing in green
解錠
UNLOCK (Can be unlocked)
Press
通話
TALK
Turns off for two seconds and
Press
then flashes in green again
Sub-screen
21