When The Security Alarm Is Activated - Panasonic 1M Operation Manuals

When the Security Alarm Is Activated

Note
Use the system after confirming that each device is properly installed.
If a Window Is Opened While the Security Alarm is Active
If a window is opened while the security alarm is
active, the magnet switch is turned on and
security indication is displayed on the base unit.
The Security Indicator
flashes in green while the
security alarm is active.
Approximately 40 seconds (factory default
Note
setting) after the magnet switch is turned on,
the event is reported to the manager room
and the handset of the door phone. If it was
an erroneous report, disarm the security
alarm within 40 seconds. When the security
alarm is disarmed, all the indicator lamps and
display are turned off. For information on how
to disarm it, refer to pages 102 to 103.
The alarm message stops approximately 80
seconds after the magnet switch is activated,
indicator lamps on the base unit and the
handset of the door phone will keep flashing.
It is also possible to disable the
Installer
automatic stop function that is
Setting
activated after 80 seconds.
Consult with the company that installed the
system or the administrating company.
●It is also possible to turn off the Security 1
Note
indication within 3 minutes. (
●Up to 4 security circuits can be connected.
The screen is displayed according to the
installation setting.
How to stop the alarm message
Press the Alarm Stop button. It is also
possible to stop the alarm sound from the
manager room. The alarm sound will be still
played in the manager room.
How to disable the security alarm function
Disarm the security alarm. (
The indicators stop flashing.
Installer
Setting
●You can choose the security alarm delay time
and the security preliminary alarm time from
60, 120, 300 or 0 (immediately) seconds.
The factory default settings of Security 1
are as follows:
Security alarm delay time: 0 seconds (alarm
starts immediately)
Security preliminary alarm time: 0 seconds
(alarm starts immediately)
●It is also possible to report to the manager room
and handset of the door phone immediately.
●It is also possible not to report to the manager room.
●You can also change the screen displayed
while the security alarm is active.
Consult with the company that installed the
system or the administrating company.
82
(siren sound) Security alarm
Page 75)
Pages 102-103)
has activated.
復旧/警報音停止
電源
Fire FIRE Gas GAS Not Home NOTHOME 警戒 SET Lock OPEN
POWER
After about 40 seconds
(also reported to the outside)
(alarm sound) Security
alarm has activated.
The Security 1 indication will turn off after
approximately 3 minutes and the periphery
of the MENU button will flash in red.
Alarm Stop
非常
EMERG.
button
RESET/STOP ALARM
火災
確認
Security 1
FIRE CONFIRM
indication
メニュー
flashing in red
MENU
終了
OFF
解錠
UNLOCK
The security alarm
indicator lamp
解錠
TALK
flashing in green
Cordless handset
of the door phone
with a camera
Alarm indicator
flashes in red