How To Set The Security Alarm Using The External Security Setting Switch (External Security Alarm/External Setting) - Panasonic 1M Operation Manuals

How to Set the Security Alarm Using
(external security alarm/external setting)
Turning the external security setting switch will set the security alarm settings for the front door and
windows at the same time.
The method to activate/deactivate the security alarm depends on the equipment installed in your apartment
Note
building and the equipment settings. Ask the company that installed the system or the administrating company.
1
Close and lock the front door
and windows to which the
magnet switches are installed
2
Turn OFF
security setting switch
The alarm indicator lamp on the
handset of the door phone lights in red
for approximately 10 seconds and the
security alarm is immediately set.
Once the security alarm is set, the alarm
lamp on the base unit will light up in green.
Note ●If the alarm indicator lamp on the handset of the door
phone or the base unit flashes, a window/door to
which the magnet switch was installed opens wide.
Disarm the security alarm on the base unit once,
completely close and lock the window/door, and then,
set the security alarm again.
●Due to magnet's specification, the security alarm may be
set without completely closing the front door or windows.
Make sure to completely close and lock the front door
and windows before setting the security alarm.
●If the security alarm is set again using the external
security setting switch after the security alarm was
set with the external security setting switch and
disarmed on the base unit, turn OFF the external
security setting switch once and then turn it ON.
●For details about operation of the external
security setting switch, contact the door lock
manufacturer or the administrating company.
It is possible to play the message or the
notification sound from the handset of the
door phone when setting the security alarm.
External security door phone sound
setting (pages 61, 63 and 64).
Installer
Setting
You can also use the external security setting
switch to disarm the security alarm and
security mode instead of the base unit.
Consult with the door lock manufacturer
or the administrating company.
104
the External Security Setting Switch
ON the external
External security setting switch
ON
OFF
Turn OFF ON
Cordless handset
of the door phone
with a camera
The alarm indicator
lighting in red (for
about 10 seconds)