In The Event Of Water Leak - Panasonic 1M Operation Manuals

In the Event of Water Leak

Note
Use the system after confirming that each device is properly installed.
1
The water leak indicator flashes
in red
2
The alarm message "(beep sound)
Water Leak." is output from the
speakers of the base unit and
extension speakers
3
30 seconds later, the alarm
message automatically stops and
the alarm indicator lamp on the
handset of the door phone or the
handset of the door phone with a
built-in camera flashes in red
No alarm sound is generated from the
handset of the door phone.
4
The water leak indicator turns off after
approximately 1 minute and the periphery
of the MENU button will flash in red
Note
It is also possible to turn off the water leak
indicator within 1 minute. (
5
If the water leak sensor detects
no more water leak, the MENU
button and the alarm indicator
lamp on the handset of the door
phone will turn off
How to stop the alarm message
Press the Alarm Stop button. (It is also possible
to stop the alarm sound from the manager room.)
Measures taken when alarm is sounding
Check the details and take necessary measures.
Installer
Setting
It is also possible to disable the alarm message
playback when the water leak alarm is active.
Consult with the company that installed the
system or the administrating company.
86
Page 75)
"Be-Be-Beep",
Water Leak.
Alarm Stop button
非常
EMERG.
復旧/警報音停止
RESET/STOP ALARM
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
OFF
電源
Gas Not Home Alarm Lock
GAS NOTHOME SET OPEN
POWER
解錠
UNLOCK
Message display
通話
flashes in red
TALK
The water leak
indicator
flashes in red