If An Alarm Occurs During Another Alarm - Panasonic 1M Operation Manuals

If an Alarm Occurs During Another Alarm

Priority assigned to each alarm is used when multiple alarms occur at the same time.
The priority order of each alarm is as shown below. Operations performed when multiple
alarms occur at the same time are shown in page 95.
Priority
order
1
*1
2
3 Emergency intensity alert (by the S-wave sensor)
4 Emergency intensity alert (level 5 lower or above)
5
*1
Emergency earthquake alert (level 3 to 5 lower)
6
*1
Emergency intensity alert (test alert)
7
*1
8
9
Emergency intensity alert (erroneous report)
10
*1
11
*1
12
*1: A later generated alarm has higher priority.
*2: Detailed intensity scale display only
94
List of descriptions of alarms and calls
Alarm/call details for
VGDT18112W • VGDT18512W
Dwelling unit at which fire occurred
Fire detector activated alarm
Dwelling unit at which fire occurred
Fire confirmation alarm
Gas leak alarm
If fire occurs on the same floor
If fire occurs on the floor directly below
Neighborhood fire alarm
Imperfect combustion (CO) alarm
Emergency alarm
Security alarm
Emergency call alarm
Generic alarm
Fire detector fault alarm
Gas detector fault alarm
Water leak alarm
Security preliminary alarm
Security lock-up
Elevator stopped
Elevator restored
Call
Over-currency alarm
Delivery notification
Alarm/call details for
VGDB18112W • VGDB18512W
Fire alarm
Gas leak alarm
Emergency intensity alert (by the S-wave sensor)
2
*
Emergency intensity alert (level 5 lower or above)
Imperfect combustion (CO) alarm
Emergency alarm
Security alarm
Emergency call alarm
Generic alarm
Emergency earthquake alert (level 3 to 5 lower)
Emergency intensity alert (test alert)
Fire detector fault alarm
Gas detector fault alarm
Water leak alarm
Security preliminary alarm
Security lock-up
Emergency intensity alert (erroneous report)
Elevator stopped
Elevator restored
Over-currency alarm
Delivery notification
2
*
Call