Panasonic 1M Operation Manuals page 9

Setting Date and Time
●Date and time are set on the Lobby Phone or the base unit in the Manager Room.
(Individual settings of date and time on the base unit are not available.)
Date and time may be deleted in a power outage. Date and time must be set again on the Lobby
Phone and base unit in the Manager Room.
Time Display of the Base Unit
●The time display on the liquid crystal screen of the base unit does not appear when shipped.When
connected to the control device, the base unit starts time calibration to display time initially. (The
time set on the Lobby Phone or the base unit in the Manager Room will be displayed.) Since the
time is regularly calibrated likewise, time may not be displayed properly when the control device is
disconnected or in a power outage.
●When not connected with the control device, the base unit cannot display time.
Note
● Once the base unit is connected to the control device, the activated time display
cannot be cancelled.
For regular cleaning...
Wipe with a soft cloth.
When visibly dirty...
Wipe with a soft cloth soaked in diluted neutral detergent
and tightly squeezed. Do not use spray type detergent.
Note
Do not use benzene etc. because it is inflammable.
●Do not pour water!
It may cause failure.
Care
Precautions in use
●Heaters and other high
temperature objects
should be kept away!
It may cause failure.
●A rice cooker or other
steaming object
should not be placed
under the base unit!
It may cause failure.
Cautions
●A TV set or radio
should be kept at least
2m from the base unit!
Images and sound
may be disrupted.
9