Panasonic 1M Operation Manuals page 59

Touch
2
Start recording. The recording time is about 15
seconds. If you finish the recording within this
time, please press
Touch to confirm that the message
3
has been recorded
●Only 1 message can be recorded. To record a
Note
new message, the old message should be
deleted.
●The same recorded message is used for the
"Pretend To Be Out Message" (
Pretend To Be Out Message
3
Select any of "Fixed Message
1/Fixed Message 2/Recorded
Message", and touch
Fixed message 1
Fixed message 2
factory default
setting
Recorded
Message
After touching
can record the message. For how to
record, please see pages 58 to 59.
Setting according to your preferences
.
page 59).
1
"No one can answer at the moment."
Note
The Fixed Message cannot be changed.
"May I have your name please?"
Note
The Fixed Message cannot be changed.
Please record a message. The recording time is about 15 seconds.
●For your own security, we would strongly advise you not to record
Note
a message which clearly indicates that you are out.
●Please record in a quiet environment.
●The volume of the answer message from the main entrance and
unit entrance will vary depending on the distance between the
person and the base unit. If the person's voice is too low, the
message will be difficult to hear. If too loud, a crackling may occur.
Note
, you
Continued on next page
2
3
Pretend To Be Out Message Type Screen
Touch
any one
●The "Recorded Message" is activated by a
call from the Lobby Phone or the Door
Phone.
●Only 1 message can be recorded. To
record a new message, the old message
should be deleted.
●The same recorded message is used for the
"Away-from-home Message" (
Touch
Touch
2
Touch
page 58).
59