Changing Living Mode - Panasonic 1M Operation Manuals

Changing Living Mode

Note
Some functions may not be available due to the equipment being used.
Selecting the current Living Mode (Absence/Sleeping/Home) will set the base unit status
appropriately according to the mode all at once. Change the Living Mode according to the scenes.
■Touch in the Top Menu to display the screen below.
Touch the button of a mode
on this screen to change to
the corresponding Living
Mode.
Current Living Mode status
(Factory setting: Home)
Current status
(Factory setting: Home)
■Setting Details (Factory Setting)
Living Mode
Absence
Sleeping
Home
Note
● If the security setting is set to "ON" in all modes, it cannot be disarmed.
●If the Security settings or Absence Mode settings are changed for the current Living
Mode, the setting for the Living Mode display is cancelled.
To change the Living Mode settings, set the Living Mode again.
● This operation manual describes functions assuming that this product is used with the factory set
Living Mode.
*1 Installation settings are required. (Consult with the company that installed the system
or the administrating company.)
*2 Setting with the manager room base unit or the Lobby Phone is required.
(Consult with the company that installed the system or the administrating company.)
Not Home Security
( Page 19) ( Page 20)
On On
Off Off
Off Off
Current Living Mode
To change the settings
of each mode, touch
Ringtone Volume
*1
( Page 20)
High
Off
High
.
Elevator
*2
( Page 20)
No Link
No Link
No Link
17