Panasonic 1M Operation Manuals page 63

Security preliminary alarm
●This can be set if the "Permit changes to delay setting" is set to "Yes" in Installation Setting.
Note
(Please contact the store responsible for installation or the service and maintenance company)
●If the "Permit changes to delay setting" has been set to "No", the "Security Preliminary Alarm" indicator does not appear.
3
Touch for the security system you wish to change
on the Security Preliminary Alarm Screen, select one of
"Off/60sec./120sec./300sec.", and touch
If you open the door with Security turned on,
Off
the Security Alarm sounds immediately.
If you open the door with Security turned on, the Preliminary Alarm
60sec.
sounds for about 60 seconds before the Security Alarm sounds.
If you open the door with Security turned on, the Preliminary Alarm
120sec.
sounds for about 120 seconds before the Security Alarm sounds.
If you open the door with Security turned on, the Preliminary Alarm
300sec.
sounds for about 300 seconds before the Security Alarm sounds.
Factory default setting
Security 1, Security 3, Security 4: Off
Security 2: 60 seconds
●While Security is turned on (
Note
to 101), the Preliminary Alarm Time cannot
be changed. To change the Door Phone
Sound, please first disarm Security.
Linked with Secured Absence
3
Select one of "On/Off" and touch
Automatically switches Living Mode to Absence
On
Mode when the external security setting is made.
Off
factory
Living Mode is not changed when the
default external security setting is made.
setting
External Security Door Phone Sound
To turn off Security using the External Security Switch, Installation Setting is required.
Note
(Consult with the company that installed the system or the administrating company.)
3
Select one of "Voice/Imitation
Sound/Off" and touch
A message is played from the Unit Entrance.
When Security is turned On: Security has been turned on.
When Door Closure Security is On: Beep
Voice
Check that all windows and doors are locked.
When Security is turned Off: Security has been turned off.
A notification sound is emitted from the Master/Unit Entrance.
When Security is turned On: beep
Imitation
When Door Closure Security is On: Beep Beep Beep
Sound
When Security is disarmed: Beeps
Off
factory
No message or notification sound is emitted
default
from the Unit Entrance.
setting
The "External Security Door Phone Sound" setting cannot be
Note
changed while Security is turned On (
change the Door Phone Sound, please first disarm Security.
Setting according to your preferences
pages 100
1
Touch
any one
pages 100 to 101). To
Security Preliminary Alarm Screen
Linked with Secured Absence Screen
1 Touch
any one
Door Phone Sound Screen
1
Touch
any one
Continued on next page
Touch
any one
2
Touch
2
Touch
2
Touch
63