Disarming The Alarm When Waking Up - Panasonic 1M Operation Manuals

Disarming the Alarm When Waking Up

1
Press MENU button while the
security alarm is active
2
Touch
Example) Sleeping Mode,
If the security setting is set to "ON" in all modes, the
Note
alarm cannot be disarmed.
The security number input screen appears.
If no security number is set, the security alarm is
disarmed. It is not necessary to perform Step
and the subsequent steps.
3
Enter the security number
The entered security number is displayed
on the screen. Enter the set security
number.
Note If you entered the wrong number, touch
All entered numbers will be deleted.
4
Touch
If the correct security number is entered, the alarm
lamp turns off and the alarm is disarmed. The
message "Security has been turned off." appears
on the screen, and the system enters the standby
status after 3 seconds. Select the Living Mode If
the wrong security number is entered, the screen
goes back to the security number input screen. In
that case, repeat the procedure from Step
If no operation is performed for 30 seconds, the system
Note
automatically goes back into the security alarm status.
In that case, repeat the procedure from Step
Installer
Setting
It is possible to sound the alarm notification message
when disarming the alarm.
Message details: "Security has been turned off."
Consult with the company that installed the system
or the administrating company.
to change living mode
Home Mode, etc.
3
.
.
3
.
1
Standby status
電源
電源 ガス 留守 警戒 戸締り
FIRE GAS NOTHOME SET OPEN
POWER
The security alarm indicator
lamp flashing in green
Security number input screen
電源
電源 ガス 留守 警戒 戸締り
FIRE GAS NOTHOME SET OPEN
POWER
The alarm lamp
lighting in green
Confirmation screen
After about 3 seconds
Goes into the standby status.
火災
MENU
確認
FIRE CONFIRM
button
メニュー
MENU
終了
OFF
Press
火災
確認
FIRE CONFIRM
メニュー
MENU
Touch the
終了
keypad
OFF
Touch
103