Set A Security Number To Disarm The Security Alarm - Panasonic 1M Operation Manuals

Set a Security Number to Disarm the Security Alarm

●If a security number is set, the alarm cannot be disarmed without entering the security
Note
number. We recommend to set a security number when using this product.
●Make sure to write down the set security number on the "Security number" field in page 48,
so that you can check the number when you forget it. You cannot disarm the security alarm
if you forget the security number.
●The security number cannot be set if the security alarm functionality is not implemented.
●It is not possible to set or change the security number when the security alarm is active.
Set or change the security number after disarming the security alarm.
●The security number is set as a 4-digit decimal number.
1
Touch
The security setup screen appears.
For information on how to launch the
setup screen, refer to page 50.
2
Touch
If no operation is performed for 30 seconds, the
Note
system automatically goes back into the standby
status.
3
Select
touch
For details about "Yes" and "Yes (Only
when an alarm sounds.)", refer to page 61.
If you choose "No" and click the OK button,
Note
the screen returns to the previous screen.
4
Enter the 4-digit security number
See the display and enter each number.
Note If you entered the wrong number, touch
All entered numbers will be deleted.
98
on the Setting Screen
on [Security Number]
or
and
Setup screen
Touch
Touch
1
any one
.
Touch
any one
Touch
2
Touch